Fixguard

BINDER FOR GRAVEL, AGGREGATES AND WOOD CHIPS

Fixguard is a gravel binder designed to fix stones and wood chips in place, keeping them stable for up to a maximum of 3 years, maintaining a clean and neat appearance, and allowing loose leaves or dirt to be easily blown away or removed.
The substrate remains water permeable, and the surface stays walkable.
Not suitable for intensive foot traffic or heavy vehicles.

Ideal for plant beds, borders, and garden paths in and around the home.

Coverage: approx. 1 m² / L

Properties

• Fixes gravel, pebbles, wood chips, mulch, clay pellets, etc.

• Easier maintenance of plant beds and effortless removal of leaves and dirt using a leaf blower

• Transparent – completely invisible after curing

• Walkable surface

• Long-lasting result – up to a maximum of 3 years (depending on conditions)

• Suitable for light, occasional foot traffic, not for vehicles or heavily used walkways

Application Instructions

Shake well before use and apply undiluted.
The surface must be clean and dry. If necessary, wash or clean the aggregates before application.
Ideal application temperature: between 15 °C and 30 °C.
Protect from rain for 48 hours and do not load the surface (no walking).

Level the aggregates or chips and compact them using a trowel or garden roller.
Spray Fixguard evenly in a thin layer over the entire surface using a low-pressure sprayer.
Allow to dry for 24 hours, then apply a second coat.
Allow to cure for 48 hours and protect against traffic and load.
Clean all tools and equipment with water.